Titanium Sheet & Plate
Stockist, importer and exporter of titanium sheet & plate in Mumbai, India — Sheet: 1000 – 1250 mm wide · Plate: 1000 – 2000 mm wide, produced to ASTM B265 / AMS 4911; ASTM B265, with EN 10204 3.1 / 3.2 certification and export to 40+ countries.
What is Titanium Sheet & Plate?
Titanium Sheet & Plate is titanium supplied in sheet & plate form — sheet and plate are flat-rolled products — sheet cold-rolled up to 6 mm and plate hot-rolled above 6 mm — used for tanks, vessels, liners, structures and fabricated equipment. Steelco Metal & Alloys stocks titanium sheet & plate in Mumbai, India in Sheet: 1000 – 1250 mm wide · Plate: 1000 – 2000 mm wide, produced to ASTM B265 / AMS 4911; ASTM B265, in grades including Titanium Grade 1, Titanium Grade 2, Titanium Grade 5 (Ti-6Al-4V), Titanium Grade 9 (Ti-3Al-2.5V). Every dispatch carries an EN 10204 3.1 mill test certificate (3.2 with third-party witness on request), PMI verification and heat-number traceability, and we export to more than 40 countries.
All grades we stock in titanium sheet & plate.
Click any grade for its full chemical composition, mechanical properties, equivalents and typical applications. Every grade ships with EN 10204 3.1 / 3.2 certification from our Mumbai stockyard.
Why Choose Titanium Sheet & Plate
Flatness and edge condition
Sheet and plate is levelled after rolling and supplied with mill or trimmed edges, so laser and waterjet cutting runs without shimming.
Cut to plan
Plasma, laser and waterjet profiling to your DXF, with bevelling and rolling handled in-house before dispatch.
Surface protection
PVC film, paper interleaving and edge protection as standard so the surface arrives free of handling marks.
Technical Specifications
| Attribute | Details |
|---|---|
| Product | Titanium Sheet & Plate |
| Size range | Sheet: 1000 – 1250 mm wide · Plate: 1000 – 2000 mm wide |
| Thickness / wall | 0.5 – 6 mm |
| Finish / condition | Annealed & pickled |
| Standards | ASTM B265 / AMS 4911; ASTM B265 |
| Grades stocked | Titanium Grade 1, Titanium Grade 2, Titanium Grade 5 (Ti-6Al-4V), Titanium Grade 9 (Ti-3Al-2.5V) |
| Certification | EN 10204 3.1 as standard, 3.2 with TÜV / SGS / BV / Lloyd's / IRS witness on request |
| Origin | Mill-direct from approved Indian, European, Japanese and Korean producers |
| Dispatch | Ex-stock Mumbai, India; export via Nhava Sheva (JNPT), Mundra and Mumbai ports |
Use our free metal weight calculator — bars, sheets, plates, pipes and sections.
Grade chemistry and mechanical properties supplied in titanium sheet & plate.
Chemical composition and mechanical properties are grade properties, not form properties — the same grade keeps the same chemistry whether it is supplied as sheet, plate or coil. The tables below list the specified limits for each grade we stock in titanium sheet & plate, tested and certified to ASTM B265 / AMS 4911; ASTM B265. Values are weight percent (maximum unless a range is shown); mechanical values are minima in the annealed condition.
Chemical composition (weight %)
| Grade | Ti | N | C | H | Fe | O | Al | V |
|---|---|---|---|---|---|---|---|---|
| Titanium Grade 1UNS R50250 | Balance | 0.03 | 0.08 | 0.015 | 0.20 | 0.18 | — | — |
| Titanium Grade 2UNS R50400 | Balance | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | — | — |
| Titanium Grade 5 (Ti-6Al-4V)UNS R56400 | Balance | 0.05 | 0.08 | 0.015 | 0.40 | 0.20 | 5.50–6.75 | 3.50–4.50 |
| Titanium Grade 9 (Ti-3Al-2.5V)UNS R56320 | Balance | 0.03 | 0.08 | 0.015 | 0.25 | 0.15 | 2.50–3.50 | 2.00–3.00 |
Balance iron. Single figures are maximum limits. Mill test certificates to EN 10204 3.1 are issued with every dispatch.
Mechanical properties (annealed, minimum)
| Grade | Tensile Strength (min) | Yield Strength (0.2%) | Elongation in 50 mm | Hardness (Brinell) | Hardness (Rockwell C) |
|---|---|---|---|---|---|
| Titanium Grade 1 | 240 MPa (35 ksi) | 170–310 MPa | 24% min | 120 HB approx | — |
| Titanium Grade 2 | 345 MPa (50 ksi) | 275–450 MPa | 20% min | 160 HB approx | — |
| Titanium Grade 5 (Ti-6Al-4V) | 895 MPa (130 ksi) | 828 MPa (120 ksi) | 10% min | — | 36 max |
| Titanium Grade 9 (Ti-3Al-2.5V) | 620 MPa (90 ksi) | 483 MPa (70 ksi) | 15% min | — | 24 approx |
Typical annealed values; actual results are stated on the heat-specific mill test certificate.
Application Sectors
Desalination & Power
Condenser and MSF evaporator tubing immune to seawater corrosion.
Chemical Processing
Chlor-alkali cells, bleaching plant, heat exchangers and pressure vessels in Grade 2.
Aerospace & Defence
Airframe fittings, fasteners and engine hardware in Grade 5 to AMS.
Oil & Gas
Titanium risers, heat exchangers and seawater lift pump hardware.
Medical
Implant-grade bar and sheet in Grade 2 and Grade 5 ELI.
Marine
Seawater piping, pumps and hull penetrations.
Cut, finished and certified to your drawing.
Material leaves our Mumbai facility finished to your specification — not as raw stock.
Why buy from Steelco.
Steelco Metal & Alloys is a Mumbai-based stockist, importer and exporter of stainless steel and nickel alloys, shipping certified material worldwide.
Quality & testing on every dispatch
- EN 10204 3.1 mill test certificate on every dispatch
- 3.2 certification with TÜV / SGS / BV / Lloyd's / IRS / IBR witness on request
- Positive Material Identification (PMI) with portable XRF / OES
- Dye-penetrant (DPT), ultrasonic (UT) and hydro testing on request
- NACE MR0175 / ISO 15156 compliance for sour service
- PED 2014/68/EU compliance for pressure equipment
- Heat-number stencilling and marking for full traceability
Deep ready stock
Ready stock of titanium sheet & plate in 4 grades at our Mumbai warehouse, so standard sizes ship the same week rather than waiting on a mill rolling programme.
Mill-direct sourcing
Approved supply from Jindal, JSL, Outokumpu, Aperam, Acerinox, Sandvik and leading Japanese and Korean mills — every item traceable to a named producer.
Full certification
EN 10204 3.1 mill test certificate as standard, 3.2 with TÜV, SGS, BV, Lloyd's, IRS or IBR witness, plus PMI, DPT and UT reports on request.
On-time worldwide delivery
Regular export shipments to the GCC, Africa, Southeast Asia, Europe, Latin America and the USA via Nhava Sheva (JNPT), Mundra and Mumbai ports.
How your material is packed and shipped.
Every consignment leaves our Mumbai facility protected for transit and documented for customs, whether it moves by road within India or by sea to an overseas port.
Domestic & export packing
- Wooden crates, pallets or steel bundles depending on section and weight
- Plastic caps, PVC film and VCI paper to protect surfaces and ends in transit
- Heat number and grade stencilled on every piece or bundle tag
- Seaworthy ISPM-15 treated packing for export consignments
Global shipments
- HS Code: 7219 / 7506
- FOB / CFR / CIF terms via Nhava Sheva (JNPT), Mundra and Mumbai ports
- Documentation: commercial invoice, packing list, MTC, bill of lading, COO, insurance
- Regular exports to the GCC, Africa, Southeast Asia, Europe, Latin America and the USA
Ready to price your requirement?
Share grade, size and quantity — our Mumbai desk responds with pricing, stock position and lead time, usually the same working day.
Frequently asked questions.
Answers to the questions our Mumbai desk is asked most often.
What is titanium sheet & plate?
+
Titanium Sheet & Plate is sheet and plate are flat-rolled products — sheet cold-rolled up to 6 mm and plate hot-rolled above 6 mm — used for tanks, vessels, liners, structures and fabricated equipment, produced in titanium to ASTM B265 / AMS 4911; ASTM B265. Steelco stocks it in Mumbai in Sheet: 1000 – 1250 mm wide · Plate: 1000 – 2000 mm wide across grades such as Titanium Grade 1, Titanium Grade 2, Titanium Grade 5 (Ti-6Al-4V), Titanium Grade 9 (Ti-3Al-2.5V).
Which grades of sheet & plate do you stock?
+
We hold 4 grades in ready stock: Titanium Grade 1 (R50250), Titanium Grade 2 (R50400), Titanium Grade 5 (Ti-6Al-4V) (R56400), Titanium Grade 9 (Ti-3Al-2.5V) (R56320). Other grades are rolled or forged to order against a mill programme.
What sizes of titanium sheet & plate are available?
+
Stock covers Sheet: 1000 – 1250 mm wide · Plate: 1000 – 2000 mm wide, with thickness or wall from 0.5 – 6 mm in annealed & pickled condition. Non-standard sizes are cut, machined or mill-rolled to your requirement.
What is the price of titanium sheet & plate in India?
+
Price is quoted per kilogram and moves with the alloy surcharge, the grade and the size. Send the grade, size, quantity and certification you need and our Mumbai desk replies the same working day with price, stock position and lead time.
Do you supply sheet & plate with test certificates?
+
Yes. Every consignment ships with an EN 10204 3.1 mill test certificate showing chemistry and mechanical results against ASTM B265 / AMS 4911; ASTM B265. EN 10204 3.2 certification witnessed by TÜV, SGS, BV, Lloyd's, IRS or IBR is arranged on request, along with PMI, dye-penetrant and ultrasonic reports.