Titanium
Commercially pure Grades 1, 2, 7, 11 and alloyed Grades 5, 9 and 12 in bar, sheet, plate, pipe, tube, flange, fitting and fastener form — ASTM B265 / B348 / B338 with 3.1 / 3.2 MTC.
What is titanium?
Titanium is a light, high-strength metal with roughly 60% the density of steel and complete immunity to seawater and chloride corrosion, thanks to a self-repairing titanium dioxide film. Commercially pure Grade 2 (UNS R50400) covers most chemical and marine service, while Ti-6Al-4V Grade 5 (R56400) delivers about 900 MPa tensile strength for aerospace and high-stress components.
Steelco Metal & Alloys stocks titanium in Mumbai in round bar, sheet, plate, seamless and welded pipe, condenser tube, flanges, buttweld fittings and fasteners, in both ASTM and AMS condition. Every dispatch leaves our Mumbai warehouse with an EN 10204 3.1 mill test certificate (3.2 with TUV, SGS, BV, Lloyd's or IRS witness on request), PMI verification and full heat-number traceability.
Titanium grades we stock.
Open a grade for full chemistry, mechanical properties, international equivalents and stocked sizes held in Mumbai.
Titanium we hold in ready stock.
Round bar
Ø 5 – 300 mm to ASTM B348 / B381, annealed, peeled and ground.
Sheet & plate
0.5 – 80 mm to ASTM B265, annealed and pickled.
Pipe
Seamless and welded 1/8" – 24" NB to ASTM B337 / B862.
Tube
Ø 6 – 76 mm welded and seamless condenser tube to ASTM B338.
Flanges & fittings
ASTM B381 flanges and B363 buttweld fittings in Gr 2 and Gr 5.
Fasteners & wire
Grade 5 studs, bolts, nuts and welding wire in matching grades.
Use our free metal weight calculator — bars, sheets, plates, pipes and sections.
Our titanium range
Ready stock across every mainstream form — dispatched with mill test certificates and full traceability from our Mumbai warehouse.
Round Bar
Ø 5 – 300 mm annealed, peeled and ground.
Explore
Sheet & Plate
0.5 – 80 mm to ASTM B265.
Explore
Pipe & Fittings
Seamless and welded 1/8" – 24" NB.
Explore
Condenser Tube
Ø 6 – 76 mm welded and seamless.
Explore
Flanges
ASTM B381 forged, Class 150 – 900.
Explore
Forged Rings
Rolled rings and discs to Ø 1500 mm.
Explore
Fasteners
Grade 5 studs, bolts, nuts and washers.
Explore
Welding Consumables
ERTi-2 and ERTi-5 filler wire.
ExploreTitanium specifications.
Standards, sizes, thickness and condition we routinely supply across every product form.
| Product | Size Range | Thickness / Wall | Finish / Condition | Standards |
|---|---|---|---|---|
Round Bar | Ø 5 – 300 mm | — | Annealed, peeled, ground | ASTM B348 / B381 / AMS 4928 |
Sheet | 1000 – 1250 mm wide | 0.5 – 6 mm | Annealed & pickled | ASTM B265 / AMS 4911 |
Plate | 1000 – 2000 mm wide | 6 – 80 mm | Annealed & pickled | ASTM B265 |
Seamless Pipe | 1/8" – 12" NB | Sch 10S – Sch 80S | Annealed & pickled | ASTM B337 / B861 |
Welded Pipe | 1/2" – 24" NB | Sch 5S – Sch 40S | Annealed & pickled | ASTM B862 |
Tube | Ø 6 – 76 mm | 0.5 – 5 mm | Bright annealed | ASTM B338 / B861 |
Flanges | 1/2" – 24" | Class 150 – 900 | Forged and machined | ASTM B381 / ASME B16.5 |
Note: Other sizes, thicknesses and custom dimensions available on request.
Where titanium is used.
Desalination & Power
Condenser and MSF evaporator tubing immune to seawater corrosion.
Chemical Processing
Chlor-alkali cells, bleaching plant, heat exchangers and pressure vessels in Grade 2.
Aerospace & Defence
Airframe fittings, fasteners and engine hardware in Grade 5 to AMS.
Oil & Gas
Titanium risers, heat exchangers and seawater lift pump hardware.
Medical
Implant-grade bar and sheet in Grade 2 and Grade 5 ELI.
Marine
Seawater piping, pumps and hull penetrations.
Frequently asked questions.
Answers to the questions our Mumbai desk is asked most often.
What is the difference between Titanium Grade 2 and Grade 5?
+
Grade 2 is commercially pure titanium with about 345 MPa tensile strength, excellent formability and weldability, used for chemical and seawater service. Grade 5 is Ti-6Al-4V, an alpha-beta alloy with roughly 900 MPa tensile strength, used where strength-to-weight matters — aerospace structures, fasteners and high-load components — but it is less formable and needs careful welding.
Is titanium resistant to seawater?
+
Yes, completely. Titanium is immune to seawater corrosion at any velocity and temperature encountered in marine service, does not pit or crevice-corrode in ambient seawater, and needs no corrosion allowance, which is why it is standard for desalination and power plant condenser tubing.
What is UNS R50400?
+
UNS R50400 is Titanium Grade 2, commercially pure titanium with a maximum 0.30% iron and 0.25% oxygen. It is supplied to ASTM B265 (sheet and plate), B348 (bar and billet), B338 (tube) and B381 (forgings and flanges).
Can titanium be welded?
+
Yes, using GTAW or plasma welding with full argon shielding on the face, root and trailing area. Titanium absorbs oxygen, nitrogen and hydrogen above about 400 °C, so a clean surface and complete inert-gas coverage are essential — a straw or blue weld colour indicates contamination and should be rejected.
Every dispatch is traceable, tested and certified.
Material is supplied with EN 10204 3.1 (3.2 on request) mill test certificates, PMI and spectro verification, and is open to third-party inspection by TUV, SGS, BV, Lloyd’s and IRS from our Mumbai warehouse.
EN 10204 3.1 / 3.2
Mill test certificate with every consignment.
PMI & Spectro
Positive material identification before dispatch.
Third-party Inspection
TUV · SGS · BV · Lloyd's · IRS welcome.
Export Documentation
Full set prepared for 40+ countries.
Other grades you may also need
Ready to price your requirement?
Share your grade, form, size and quantity — our Mumbai desk responds with pricing, stock position and lead time, usually the same working day.