Magnesium Alloy Machined Parts
Stockist, importer and exporter of magnesium alloy machined parts in Mumbai, India — Ø 5 mm – Ø 800 mm turned, up to 1500 mm milled, produced to Machined to ISO 2768-m or your drawing tolerance, with EN 10204 3.1 / 3.2 certification and export to 40+ countries.
What is Magnesium Alloy Machined Parts?
Magnesium Alloy Machined Parts is magnesium alloy supplied in machined parts form — machined parts are finished components turned, milled and ground from our own stock bar, plate and forgings, delivered to your drawing with dimensional and material documentation. Steelco Metal & Alloys stocks magnesium alloy machined parts in Mumbai, India in Ø 5 mm – Ø 800 mm turned, up to 1500 mm milled, produced to Machined to ISO 2768-m or your drawing tolerance, in grades including Magnesium AZ31B, Magnesium AZ61A, Magnesium AZ80A, Magnesium AZ91D. Every dispatch carries an EN 10204 3.1 mill test certificate (3.2 with third-party witness on request), PMI verification and heat-number traceability, and we export to more than 40 countries.
All grades we stock in magnesium alloy machined parts.
Click any grade for its full chemical composition, mechanical properties, equivalents and typical applications. Every grade ships with EN 10204 3.1 / 3.2 certification from our Mumbai stockyard.
Why Choose Magnesium Alloy Machined Parts
Sound forged structure
Machined parts is forged with a controlled reduction ratio and solution annealed, giving uniform grain flow and full mechanical properties through section.
Machined to drawing
Rough turned, proof machined or finish machined against your drawing, with dimensional reports supplied.
NDT on request
Ultrasonic, dye-penetrant and magnetic-particle examination to ASTM A388 / E165 before dispatch.
Technical Specifications
| Attribute | Details |
|---|---|
| Product | Magnesium Alloy Machined Parts |
| Size range | Ø 5 mm – Ø 800 mm turned, up to 1500 mm milled |
| Thickness / wall | Ø 5 mm – Ø 800 mm turned, up to 1500 mm milled |
| Finish / condition | As per specification |
| Standards | Machined to ISO 2768-m or your drawing tolerance |
| Grades stocked | Magnesium AZ31B, Magnesium AZ61A, Magnesium AZ80A, Magnesium AZ91D, Magnesium ZK60A |
| Certification | EN 10204 3.1 as standard, 3.2 with TÜV / SGS / BV / Lloyd's / IRS witness on request |
| Origin | Mill-direct from approved Indian, European, Japanese and Korean producers |
| Dispatch | Ex-stock Mumbai, India; export via Nhava Sheva (JNPT), Mundra and Mumbai ports |
Use our free metal weight calculator — bars, sheets, plates, pipes and sections.
Grade chemistry and mechanical properties supplied in magnesium alloy machined parts.
Chemical composition and mechanical properties are grade properties, not form properties — the same grade keeps the same chemistry whether it is supplied as sheet, plate or coil. The tables below list the specified limits for each grade we stock in magnesium alloy machined parts, tested and certified to Machined to ISO 2768-m or your drawing tolerance. Values are weight percent (maximum unless a range is shown); mechanical values are minima in the annealed condition.
Chemical composition (weight %)
| Grade | Mg | Al | Zn | Mn | Si | Cu | Fe | Ni |
|---|---|---|---|---|---|---|---|---|
| Magnesium AZ31BUNS M11311 | Balance | 2.5–3.5 | 0.6–1.4 | 0.20–— | 0.10 | 0.05 | — | — |
| Magnesium AZ61AUNS M11610 | Balance | 5.8–7.2 | 0.40–1.5 | 0.15–— | 0.10 | 0.05 | — | — |
| Magnesium AZ80AUNS M11800 | Balance | 7.8–9.2 | 0.20–0.8 | 0.12–— | 0.10 | 0.05 | — | — |
| Magnesium AZ91DUNS M11916 | Balance | 8.3–9.7 | 0.35–1.0 | 0.15–0.50 | — | 0.030 | 0.005 | 0.002 |
Balance iron. Single figures are maximum limits. Mill test certificates to EN 10204 3.1 are issued with every dispatch.
Mechanical properties (annealed, minimum)
| Grade | Tensile Strength | Yield Strength (0.2%) | Elongation | Hardness | Tensile Strength (T5) |
|---|---|---|---|---|---|
| Magnesium AZ31B | 260 MPa typical (H24) | 200 MPa typical | 15% typical | 49 HB typical | — |
| Magnesium AZ61A | 310 MPa typical (F) | 230 MPa typical | 16% typical | 55 HB typical | — |
| Magnesium AZ80A | — | 275 MPa typical | 7% typical | 80 HB typical | 380 MPa typical |
| Magnesium AZ91D | 230 MPa typical (as cast) | 160 MPa typical | 3% typical | 63 HB typical | — |
Typical annealed values; actual results are stated on the heat-specific mill test certificate.
Application Sectors
Aerospace
Housings, brackets, gearbox casings and interior structures.
Automotive & EV
Steering wheel armatures, instrument panel beams and battery housings.
Tooling & Jigs
Cast tooling plate for lightweight fixtures and vacuum forming tools.
Electronics
Laptop, camera and instrument housings needing EMI shielding.
Cathodic Protection
Sacrificial anodes for tanks, pipelines and water heaters.
Printing
Photoengraving sheet for embossing and stamping dies.
Cut, finished and certified to your drawing.
Material leaves our Mumbai facility finished to your specification — not as raw stock.
Why buy from Steelco.
Steelco Metal & Alloys is a Mumbai-based stockist, importer and exporter of stainless steel and nickel alloys, shipping certified material worldwide.
Quality & testing on every dispatch
- EN 10204 3.1 mill test certificate on every dispatch
- 3.2 certification with TÜV / SGS / BV / Lloyd's / IRS / IBR witness on request
- Positive Material Identification (PMI) with portable XRF / OES
- Dye-penetrant (DPT), ultrasonic (UT) and hydro testing on request
- NACE MR0175 / ISO 15156 compliance for sour service
- PED 2014/68/EU compliance for pressure equipment
- Heat-number stencilling and marking for full traceability
Deep ready stock
Ready stock of magnesium alloy machined parts in 5 grades at our Mumbai warehouse, so standard sizes ship the same week rather than waiting on a mill rolling programme.
Mill-direct sourcing
Approved supply from Jindal, JSL, Outokumpu, Aperam, Acerinox, Sandvik and leading Japanese and Korean mills — every item traceable to a named producer.
Full certification
EN 10204 3.1 mill test certificate as standard, 3.2 with TÜV, SGS, BV, Lloyd's, IRS or IBR witness, plus PMI, DPT and UT reports on request.
On-time worldwide delivery
Regular export shipments to the GCC, Africa, Southeast Asia, Europe, Latin America and the USA via Nhava Sheva (JNPT), Mundra and Mumbai ports.
How your material is packed and shipped.
Every consignment leaves our Mumbai facility protected for transit and documented for customs, whether it moves by road within India or by sea to an overseas port.
Domestic & export packing
- Wooden crates, pallets or steel bundles depending on section and weight
- Plastic caps, PVC film and VCI paper to protect surfaces and ends in transit
- Heat number and grade stencilled on every piece or bundle tag
- Seaworthy ISPM-15 treated packing for export consignments
Global shipments
- HS Code: 7326 / 8487
- FOB / CFR / CIF terms via Nhava Sheva (JNPT), Mundra and Mumbai ports
- Documentation: commercial invoice, packing list, MTC, bill of lading, COO, insurance
- Regular exports to the GCC, Africa, Southeast Asia, Europe, Latin America and the USA
Ready to price your requirement?
Share grade, size and quantity — our Mumbai desk responds with pricing, stock position and lead time, usually the same working day.
Frequently asked questions.
Answers to the questions our Mumbai desk is asked most often.
What is magnesium alloy machined parts?
+
Magnesium Alloy Machined Parts is machined parts are finished components turned, milled and ground from our own stock bar, plate and forgings, delivered to your drawing with dimensional and material documentation, produced in magnesium alloy to Machined to ISO 2768-m or your drawing tolerance. Steelco stocks it in Mumbai in Ø 5 mm – Ø 800 mm turned, up to 1500 mm milled across grades such as Magnesium AZ31B, Magnesium AZ61A, Magnesium AZ80A, Magnesium AZ91D.
Which grades of machined parts do you stock?
+
We hold 5 grades in ready stock: Magnesium AZ31B (M11311), Magnesium AZ61A (M11610), Magnesium AZ80A (M11800), Magnesium AZ91D (M11916), Magnesium ZK60A (M16600). Other grades are rolled or forged to order against a mill programme.
What sizes of magnesium alloy machined parts are available?
+
Stock covers Ø 5 mm – Ø 800 mm turned, up to 1500 mm milled, with thickness or wall from Ø 5 mm – Ø 800 mm turned, up to 1500 mm milled in as per specification condition. Non-standard sizes are cut, machined or mill-rolled to your requirement.
What is the price of magnesium alloy machined parts in India?
+
Price is quoted per kilogram and moves with the alloy surcharge, the grade and the size. Send the grade, size, quantity and certification you need and our Mumbai desk replies the same working day with price, stock position and lead time.
Do you supply machined parts with test certificates?
+
Yes. Every consignment ships with an EN 10204 3.1 mill test certificate showing chemistry and mechanical results against Machined to ISO 2768-m or your drawing tolerance. EN 10204 3.2 certification witnessed by TÜV, SGS, BV, Lloyd's, IRS or IBR is arranged on request, along with PMI, dye-penetrant and ultrasonic reports.