Monel Pipe & Fittings
Stockist, importer and exporter of monel pipe & fittings in Mumbai, India — Seamless Pipe: 1/8" – 8" NB, produced to ASTM B165, with EN 10204 3.1 / 3.2 certification and export to 40+ countries.
What is Monel Pipe & Fittings?
Monel Pipe & Fittings is monel supplied in pipe & fittings form — pipe and fittings form the pressure-piping package — seamless and welded pipe with matching buttweld elbows, tees, reducers and caps to ASME B16.9 — used for process, utility and transfer lines. Steelco Metal & Alloys stocks monel pipe & fittings in Mumbai, India in Seamless Pipe: 1/8" – 8" NB, produced to ASTM B165, in grades including Monel 400, Monel R-405, Monel K-500. Every dispatch carries an EN 10204 3.1 mill test certificate (3.2 with third-party witness on request), PMI verification and heat-number traceability, and we export to more than 40 countries.
All grades we stock in monel pipe & fittings.
Click any grade for its full chemical composition, mechanical properties, equivalents and typical applications. Every grade ships with EN 10204 3.1 / 3.2 certification from our Mumbai stockyard.
Why Choose Monel Pipe & Fittings
Dimensional accuracy
Pipe is supplied within ASTM wall-thickness and ovality limits, with ends square-cut or bevelled to ASME B16.25 for site welding.
Tested and documented
Hydrostatic or eddy-current testing, intergranular corrosion testing and radiography on request, with results attached to the certificate.
Matched fittings
Buttweld fittings, flanges and gaskets from the same heat wherever possible, so the whole spool carries one traceable chemistry.
Technical Specifications
| Attribute | Details |
|---|---|
| Product | Monel Pipe & Fittings |
| Size range | Seamless Pipe: 1/8" – 8" NB |
| Thickness / wall | Sch 10S – Sch 160 |
| Finish / condition | Annealed & pickled |
| Standards | ASTM B165 |
| Grades stocked | Monel 400, Monel R-405, Monel K-500 |
| Certification | EN 10204 3.1 as standard, 3.2 with TÜV / SGS / BV / Lloyd's / IRS witness on request |
| Origin | Mill-direct from approved Indian, European, Japanese and Korean producers |
| Dispatch | Ex-stock Mumbai, India; export via Nhava Sheva (JNPT), Mundra and Mumbai ports |
Use our free metal weight calculator — bars, sheets, plates, pipes and sections.
Grade chemistry and mechanical properties supplied in monel pipe & fittings.
Chemical composition and mechanical properties are grade properties, not form properties — the same grade keeps the same chemistry whether it is supplied as sheet, plate or coil. The tables below list the specified limits for each grade we stock in monel pipe & fittings, tested and certified to ASTM B165. Values are weight percent (maximum unless a range is shown); mechanical values are minima in the annealed condition.
Chemical composition (weight %)
| Grade | Ni | Cu | Fe | Mn | C | Si | S | Al | Ti |
|---|---|---|---|---|---|---|---|---|---|
| Monel 400UNS N04400 | 63.0–Balance | 28.0–34.0 | 2.50 | 2.00 | 0.30 | 0.50 | 0.024 | — | — |
| Monel R-405UNS N04405 | 63.0–Balance | 28.0–34.0 | 2.50 | 2.00 | 0.30 | 0.50 | 0.025–0.060 | — | — |
| Monel K-500UNS N05500 | 63.0–Balance | 27.0–33.0 | 2.00 | 1.50 | 0.25 | — | 0.010 | 2.30–3.15 | 0.35–0.85 |
Balance iron. Single figures are maximum limits. Mill test certificates to EN 10204 3.1 are issued with every dispatch.
Mechanical properties (annealed, minimum)
| Grade | Tensile Strength (min) | Yield Strength (0.2%) | Elongation in 50 mm | Hardness (Rockwell B) | Hardness (Rockwell C) |
|---|---|---|---|---|---|
| Monel 400 | 480 MPa (70 ksi) | 170 MPa (25 ksi) | 35% min | 75 approx | — |
| Monel R-405 | 480 MPa (70 ksi) | 170 MPa (25 ksi) | 25% min | 75 approx | — |
| Monel K-500 | 965 MPa (140 ksi), aged | 690 MPa (100 ksi), aged | 20% min | — | 27–35 (NACE max 35) |
Typical annealed values; actual results are stated on the heat-specific mill test certificate.
Application Sectors
Marine & Shipbuilding
Propeller shafts, pump shafts, seawater valves and fasteners in Monel K-500.
Oil & Gas
Sour-service fasteners, safety-valve trim and downhole hardware to NACE MR0175.
Chemical Processing
Hydrofluoric acid plant piping, heat exchangers and vessels in Monel 400.
Desalination
Brine heater tubes, evaporator internals and seawater piping.
Power
Feedwater heater tubing and condenser tubes resistant to erosion-corrosion.
Defence
Submarine seawater systems, non-magnetic hardware and cryogenic components.
Cut, finished and certified to your drawing.
Material leaves our Mumbai facility finished to your specification — not as raw stock.
Why buy from Steelco.
Steelco Metal & Alloys is a Mumbai-based stockist, importer and exporter of stainless steel and nickel alloys, shipping certified material worldwide.
Quality & testing on every dispatch
- EN 10204 3.1 mill test certificate on every dispatch
- 3.2 certification with TÜV / SGS / BV / Lloyd's / IRS / IBR witness on request
- Positive Material Identification (PMI) with portable XRF / OES
- Dye-penetrant (DPT), ultrasonic (UT) and hydro testing on request
- NACE MR0175 / ISO 15156 compliance for sour service
- PED 2014/68/EU compliance for pressure equipment
- Heat-number stencilling and marking for full traceability
Deep ready stock
Ready stock of monel pipe & fittings in 3 grades at our Mumbai warehouse, so standard sizes ship the same week rather than waiting on a mill rolling programme.
Mill-direct sourcing
Approved supply from Jindal, JSL, Outokumpu, Aperam, Acerinox, Sandvik and leading Japanese and Korean mills — every item traceable to a named producer.
Full certification
EN 10204 3.1 mill test certificate as standard, 3.2 with TÜV, SGS, BV, Lloyd's, IRS or IBR witness, plus PMI, DPT and UT reports on request.
On-time worldwide delivery
Regular export shipments to the GCC, Africa, Southeast Asia, Europe, Latin America and the USA via Nhava Sheva (JNPT), Mundra and Mumbai ports.
How your material is packed and shipped.
Every consignment leaves our Mumbai facility protected for transit and documented for customs, whether it moves by road within India or by sea to an overseas port.
Domestic & export packing
- Wooden crates, pallets or steel bundles depending on section and weight
- Plastic caps, PVC film and VCI paper to protect surfaces and ends in transit
- Heat number and grade stencilled on every piece or bundle tag
- Seaworthy ISPM-15 treated packing for export consignments
Global shipments
- HS Code: 7304 / 7307
- FOB / CFR / CIF terms via Nhava Sheva (JNPT), Mundra and Mumbai ports
- Documentation: commercial invoice, packing list, MTC, bill of lading, COO, insurance
- Regular exports to the GCC, Africa, Southeast Asia, Europe, Latin America and the USA
Ready to price your requirement?
Share grade, size and quantity — our Mumbai desk responds with pricing, stock position and lead time, usually the same working day.
Frequently asked questions.
Answers to the questions our Mumbai desk is asked most often.
What is monel pipe & fittings?
+
Monel Pipe & Fittings is pipe and fittings form the pressure-piping package — seamless and welded pipe with matching buttweld elbows, tees, reducers and caps to ASME B16.9 — used for process, utility and transfer lines, produced in monel to ASTM B165. Steelco stocks it in Mumbai in Seamless Pipe: 1/8" – 8" NB across grades such as Monel 400, Monel R-405, Monel K-500.
Which grades of pipe & fittings do you stock?
+
We hold 3 grades in ready stock: Monel 400 (N04400), Monel R-405 (N04405), Monel K-500 (N05500). Other grades are rolled or forged to order against a mill programme.
What sizes of monel pipe & fittings are available?
+
Stock covers Seamless Pipe: 1/8" – 8" NB, with thickness or wall from Sch 10S – Sch 160 in annealed & pickled condition. Non-standard sizes are cut, machined or mill-rolled to your requirement.
What is the price of monel pipe & fittings in India?
+
Price is quoted per kilogram and moves with the alloy surcharge, the grade and the size. Send the grade, size, quantity and certification you need and our Mumbai desk replies the same working day with price, stock position and lead time.
Do you supply pipe & fittings with test certificates?
+
Yes. Every consignment ships with an EN 10204 3.1 mill test certificate showing chemistry and mechanical results against ASTM B165. EN 10204 3.2 certification witnessed by TÜV, SGS, BV, Lloyd's, IRS or IBR is arranged on request, along with PMI, dye-penetrant and ultrasonic reports.