Tantalum Plate
Stockist, importer and exporter of tantalum plate in Mumbai, India — Plate: Up to 1000 mm wide, produced to ASTM B708, with EN 10204 3.1 / 3.2 certification and export to 40+ countries.
What is Tantalum Plate?
Tantalum Plate is tantalum supplied in plate form — plate is a hot-rolled flat product above 6 mm thick, annealed and pickled, used for pressure-vessel shells, tube sheets, base plates, wear liners and heavy fabrication. Steelco Metal & Alloys stocks tantalum plate in Mumbai, India in Plate: Up to 1000 mm wide, produced to ASTM B708, in grades including Tantalum (unalloyed), Ta-2.5W, Ta-10W. Every dispatch carries an EN 10204 3.1 mill test certificate (3.2 with third-party witness on request), PMI verification and heat-number traceability, and we export to more than 40 countries.
All grades we stock in tantalum plate.
Click any grade for its full chemical composition, mechanical properties, equivalents and typical applications. Every grade ships with EN 10204 3.1 / 3.2 certification from our Mumbai stockyard.
Why Choose Tantalum Plate
Flatness and edge condition
Plate is levelled after rolling and supplied with mill or trimmed edges, so laser and waterjet cutting runs without shimming.
Cut to plan
Plasma, laser and waterjet profiling to your DXF, with bevelling and rolling handled in-house before dispatch.
Surface protection
PVC film, paper interleaving and edge protection as standard so the surface arrives free of handling marks.
Technical Specifications
| Attribute | Details |
|---|---|
| Product | Tantalum Plate |
| Size range | Plate: Up to 1000 mm wide |
| Thickness / wall | 10 – 30 mm |
| Finish / condition | Annealed |
| Standards | ASTM B708 |
| Grades stocked | Tantalum (unalloyed), Ta-2.5W, Ta-10W |
| Certification | EN 10204 3.1 as standard, 3.2 with TÜV / SGS / BV / Lloyd's / IRS witness on request |
| Origin | Mill-direct from approved Indian, European, Japanese and Korean producers |
| Dispatch | Ex-stock Mumbai, India; export via Nhava Sheva (JNPT), Mundra and Mumbai ports |
Use our free metal weight calculator — bars, sheets, plates, pipes and sections.
Grade chemistry and mechanical properties supplied in tantalum plate.
Chemical composition and mechanical properties are grade properties, not form properties — the same grade keeps the same chemistry whether it is supplied as sheet, plate or coil. The tables below list the specified limits for each grade we stock in tantalum plate, tested and certified to ASTM B708. Values are weight percent (maximum unless a range is shown); mechanical values are minima in the annealed condition.
Chemical composition (weight %)
| Grade | Ta | Nb | C | O | N | Fe | W |
|---|---|---|---|---|---|---|---|
| Tantalum (unalloyed)UNS R05200 / R05400 | 99.9 min | 0.10 | 0.010 | 0.015 | 0.010 | 0.010 | — |
| Ta-2.5WUNS R05252 | Balance | 0.50 | 0.010 | 0.015 | 0.010 | — | 2.0–3.5 |
| Ta-10WUNS R05255 | Balance | 0.50 | 0.010 | 0.015 | 0.010 | — | 9.0–11.0 |
Balance iron. Single figures are maximum limits. Mill test certificates to EN 10204 3.1 are issued with every dispatch.
Mechanical properties (annealed, minimum)
| Grade | Tensile Strength (annealed) | Yield Strength (0.2%) | Elongation | Melting point | Density |
|---|---|---|---|---|---|
| Tantalum (unalloyed) | 205 MPa min | 138 MPa min | 25% min | 3017 °C | — |
| Ta-2.5W | 310 MPa min | 205 MPa min | 20% min | — | 16.6 g/cm³ |
| Ta-10W | 550 MPa min | 450 MPa min | 15% min | — | 16.9 g/cm³ |
Typical annealed values; actual results are stated on the heat-specific mill test certificate.
Application Sectors
Chemical & Acid Plants
Bayonet heaters, condensers, thermowells and clad reactor linings in hot HCl and H₂SO₄.
Pharma & Fine Chemicals
Corrosion-proof repair patches and agitator sheathing in glass-lined vessels.
Electronics
Capacitor anodes, sputtering targets and thin-film deposition hardware.
Vacuum Furnaces
Heat shields, heating elements and crucibles above 2000 °C.
Medical
Implants, surgical clips and radiographic markers.
Aerospace
Rocket nozzle inserts and high-temperature structural components.
Cut, finished and certified to your drawing.
Material leaves our Mumbai facility finished to your specification — not as raw stock.
Why buy from Steelco.
Steelco Metal & Alloys is a Mumbai-based stockist, importer and exporter of stainless steel and nickel alloys, shipping certified material worldwide.
Quality & testing on every dispatch
- EN 10204 3.1 mill test certificate on every dispatch
- 3.2 certification with TÜV / SGS / BV / Lloyd's / IRS / IBR witness on request
- Positive Material Identification (PMI) with portable XRF / OES
- Dye-penetrant (DPT), ultrasonic (UT) and hydro testing on request
- NACE MR0175 / ISO 15156 compliance for sour service
- PED 2014/68/EU compliance for pressure equipment
- Heat-number stencilling and marking for full traceability
Deep ready stock
Ready stock of tantalum plate in 3 grades at our Mumbai warehouse, so standard sizes ship the same week rather than waiting on a mill rolling programme.
Mill-direct sourcing
Approved supply from Jindal, JSL, Outokumpu, Aperam, Acerinox, Sandvik and leading Japanese and Korean mills — every item traceable to a named producer.
Full certification
EN 10204 3.1 mill test certificate as standard, 3.2 with TÜV, SGS, BV, Lloyd's, IRS or IBR witness, plus PMI, DPT and UT reports on request.
On-time worldwide delivery
Regular export shipments to the GCC, Africa, Southeast Asia, Europe, Latin America and the USA via Nhava Sheva (JNPT), Mundra and Mumbai ports.
How your material is packed and shipped.
Every consignment leaves our Mumbai facility protected for transit and documented for customs, whether it moves by road within India or by sea to an overseas port.
Domestic & export packing
- Wooden crates, pallets or steel bundles depending on section and weight
- Plastic caps, PVC film and VCI paper to protect surfaces and ends in transit
- Heat number and grade stencilled on every piece or bundle tag
- Seaworthy ISPM-15 treated packing for export consignments
Global shipments
- HS Code: 7208 / 7219
- FOB / CFR / CIF terms via Nhava Sheva (JNPT), Mundra and Mumbai ports
- Documentation: commercial invoice, packing list, MTC, bill of lading, COO, insurance
- Regular exports to the GCC, Africa, Southeast Asia, Europe, Latin America and the USA
Ready to price your requirement?
Share grade, size and quantity — our Mumbai desk responds with pricing, stock position and lead time, usually the same working day.
Frequently asked questions.
Answers to the questions our Mumbai desk is asked most often.
What is tantalum plate?
+
Tantalum Plate is plate is a hot-rolled flat product above 6 mm thick, annealed and pickled, used for pressure-vessel shells, tube sheets, base plates, wear liners and heavy fabrication, produced in tantalum to ASTM B708. Steelco stocks it in Mumbai in Plate: Up to 1000 mm wide across grades such as Tantalum (unalloyed), Ta-2.5W, Ta-10W.
Which grades of plate do you stock?
+
We hold 3 grades in ready stock: Tantalum (unalloyed) (R05200 / R05400), Ta-2.5W (R05252), Ta-10W (R05255). Other grades are rolled or forged to order against a mill programme.
What sizes of tantalum plate are available?
+
Stock covers Plate: Up to 1000 mm wide, with thickness or wall from 10 – 30 mm in annealed condition. Non-standard sizes are cut, machined or mill-rolled to your requirement.
What is the price of tantalum plate in India?
+
Price is quoted per kilogram and moves with the alloy surcharge, the grade and the size. Send the grade, size, quantity and certification you need and our Mumbai desk replies the same working day with price, stock position and lead time.
Do you supply plate with test certificates?
+
Yes. Every consignment ships with an EN 10204 3.1 mill test certificate showing chemistry and mechanical results against ASTM B708. EN 10204 3.2 certification witnessed by TÜV, SGS, BV, Lloyd's, IRS or IBR is arranged on request, along with PMI, dye-penetrant and ultrasonic reports.

