Home · Nickel Aluminium Bronze · Cast NAB C95800

Cast NAB C95800

Cast nickel aluminium bronze C95800 propellers, valve bodies and pump casings, temper annealed. Mumbai stockist and exporter, 3.1 MTC, exported worldwide.

Overview

About Cast NAB C95800

Cast nickel aluminium bronze C95800 propellers, valve bodies and pump casings, temper annealed. Mumbai stockist and exporter, 3.1 MTC, exported worldwide.

C95800 is the most widely specified cast nickel aluminium bronze for seawater service, with balanced nickel and iron near 4.5% each and a mandatory temper anneal at 675 °C to avoid selective phase attack. It is the default alloy for marine propellers, valve bodies, pump casings and offshore water-injection hardware.

Steelco Metal & Alloys stocks Cast NAB C95800 (UNS C95800) in Mumbai, India as a stockist, importer and exporter, and ships to 40+ countries. Every dispatch carries EN 10204 3.1 (3.2 on request) mill test certificates, PMI verification and is open to third-party inspection.

Stock Profile

Available forms and size range for Cast NAB C95800

Available Forms

  • Castings
  • Valve Bodies
  • Propellers
  • Pump Casings
  • Flanges
  • Machined Parts

Size Range

  • Sand and centrifugal castings to customer pattern
  • temper annealed at 675 °C with certificates
Chemistry

Chemical composition of Cast NAB C95800 (% by weight)

Values are per the governing ASTM / ASME product specification. A single value means a maximum; a range shows the specified minimum and maximum. Balance is iron.

CuAlNiFeMnSi
≤ Balance8.5–9.54.0–5.03.5–4.50.8–1.5≤ 0.10
maxrangerangerangerangemax
Mechanical

Mechanical properties of Cast NAB C95800 (annealed, room temperature)

PropertyTypical Value
Tensile Strength (min)585 MPa (85 ksi)
Yield Strength (0.2%)240 MPa min
Elongation15% min
Hardness159 HB min
Standards

Cast NAB C95800 specifications and international equivalents

AttributeDetails
ASTM / ASMEASTM B148 / B271 C95800 · UNS C95800
EN / DINEN 1982 CuAl10Fe5Ni5-C
JISJIS H5114 AlBC 3
UNSUNS C95800
Density7.64 g/cm³
Size RangeSand and centrifugal castings to customer pattern · temper annealed at 675 °C with certificates
CertificationsEN 10204 3.1 / 3.2 MTC · PMI · Third-party inspection
Need the weight for these sizes?

Use our free metal weight calculator — bars, sheets, plates, pipes and sections.

Weight Calculator
Certified Quality

Every dispatch is traceable, tested and certified.

Material is supplied with EN 10204 3.1 (3.2 on request) mill test certificates, PMI and spectro verification, and is open to third-party inspection by TUV, SGS, BV, Lloyd’s and IRS from our Mumbai warehouse.

EN 10204 3.1 / 3.2

Mill test certificate with every consignment.

PMI & Spectro

Positive material identification before dispatch.

Third-party Inspection

TUV · SGS · BV · Lloyd's · IRS welcome.

Export Documentation

Full set prepared for 40+ countries.

Next Step

Ready to price your requirement?

Share your grade, form, size and quantity — our Mumbai desk responds with pricing, stock position and lead time, usually the same working day.