Inconel Flanges
Stockist, importer and exporter of inconel flanges in Mumbai, India — Flanges: 1/2" – 36", produced to ASTM B564 / ASME B16.5, with EN 10204 3.1 / 3.2 certification and export to 40+ countries.
What is Inconel Flanges?
Inconel Flanges is inconel supplied in flanges form — flanges are forged connectors that bolt piping, valves and equipment together — weld neck, slip-on, blind, socket weld, lap joint, threaded and orifice types in raised-face or ring-joint form. Steelco Metal & Alloys stocks inconel flanges in Mumbai, India in Flanges: 1/2" – 36", produced to ASTM B564 / ASME B16.5, in grades including Inconel 600, Inconel 601, Inconel 625, Inconel 718. Every dispatch carries an EN 10204 3.1 mill test certificate (3.2 with third-party witness on request), PMI verification and heat-number traceability, and we export to more than 40 countries.
All grades we stock in inconel flanges.
Click any grade for its full chemical composition, mechanical properties, equivalents and typical applications. Every grade ships with EN 10204 3.1 / 3.2 certification from our Mumbai stockyard.
Why Choose Inconel Flanges
Sound forged structure
Flanges is forged with a controlled reduction ratio and solution annealed, giving uniform grain flow and full mechanical properties through section.
Machined to drawing
Rough turned, proof machined or finish machined against your drawing, with dimensional reports supplied.
NDT on request
Ultrasonic, dye-penetrant and magnetic-particle examination to ASTM A388 / E165 before dispatch.
Technical Specifications
| Attribute | Details |
|---|---|
| Product | Inconel Flanges |
| Size range | Flanges: 1/2" – 36" |
| Thickness / wall | Class 150 – 2500 |
| Finish / condition | RF / RTJ / FF machined |
| Standards | ASTM B564 / ASME B16.5 |
| Grades stocked | Inconel 600, Inconel 601, Inconel 625, Inconel 718, Inconel X-750, Incoloy 800 / 800H / 800HT |
| Certification | EN 10204 3.1 as standard, 3.2 with TÜV / SGS / BV / Lloyd's / IRS witness on request |
| Origin | Mill-direct from approved Indian, European, Japanese and Korean producers |
| Dispatch | Ex-stock Mumbai, India; export via Nhava Sheva (JNPT), Mundra and Mumbai ports |
Use our free metal weight calculator — bars, sheets, plates, pipes and sections.
Grade chemistry and mechanical properties supplied in inconel flanges.
Chemical composition and mechanical properties are grade properties, not form properties — the same grade keeps the same chemistry whether it is supplied as sheet, plate or coil. The tables below list the specified limits for each grade we stock in inconel flanges, tested and certified to ASTM B564 / ASME B16.5. Values are weight percent (maximum unless a range is shown); mechanical values are minima in the annealed condition.
Chemical composition (weight %)
| Grade | Ni | Cr | Fe | Mn | C | Si | Cu | S | Al | Mo | Nb+Ta | Ti |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inconel 600UNS N06600 | 72.0–Balance | 14.0–17.0 | 6.00–10.0 | 1.00 | 0.15 | 0.50 | 0.50 | 0.015 | — | — | — | — |
| Inconel 601UNS N06601 | 58.0–63.0 | 21.0–25.0 | Balance | 1.00 | 0.10 | 0.50 | — | 0.015 | 1.00–1.70 | — | — | — |
| Inconel 625UNS N06625 | 58.0–Balance | 20.0–23.0 | 5.00 | 0.50 | 0.10 | 0.50 | — | — | — | 8.00–10.0 | 3.15–4.15 | — |
| Inconel 718UNS N07718 | 50.0–55.0 | 17.0–21.0 | Balance | — | 0.08 | — | — | — | 0.20–0.80 | 2.80–3.30 | 4.75–5.50 | 0.65–1.15 |
Balance iron. Single figures are maximum limits. Mill test certificates to EN 10204 3.1 are issued with every dispatch.
Mechanical properties (annealed, minimum)
| Grade | Tensile Strength (min) | Yield Strength (0.2%) | Elongation in 50 mm | Hardness (Rockwell B) | Hardness (Rockwell C) |
|---|---|---|---|---|---|
| Inconel 600 | 550 MPa (80 ksi) | 240 MPa (35 ksi) | 30% min | 75–85 approx | — |
| Inconel 601 | 550 MPa (80 ksi) | 205 MPa (30 ksi) | 30% min | 80–90 approx | — |
| Inconel 625 | 827 MPa (120 ksi) | 414 MPa (60 ksi) | 30% min | 95 max, annealed | — |
| Inconel 718 | 1275 MPa (185 ksi), aged | 1030 MPa (150 ksi), aged | 12% min | — | 36–44 aged (NACE max 40) |
Typical annealed values; actual results are stated on the heat-specific mill test certificate.
Application Sectors
Oil & Gas
Wellhead trim, downhole tubulars and sour-service components in Inconel 625 and 718.
Aerospace
Turbine discs, shafts, rings and fasteners in Inconel 718 and X-750 to AMS.
Power & Nuclear
Steam generator tubes, superheater hangers and reheater supports in 600 and 800H.
Chemical Processing
Reactor internals, bellows and acid piping in Inconel 600 and 625.
Furnace & Heat Treatment
Muffles, retorts, radiant tubes and fixtures in Inconel 601 and 800HT.
Marine & Offshore
Seawater piping, risers and umbilical hardware in Inconel 625.
Cut, finished and certified to your drawing.
Material leaves our Mumbai facility finished to your specification — not as raw stock.
Why buy from Steelco.
Steelco Metal & Alloys is a Mumbai-based stockist, importer and exporter of stainless steel and nickel alloys, shipping certified material worldwide.
Quality & testing on every dispatch
- EN 10204 3.1 mill test certificate on every dispatch
- 3.2 certification with TÜV / SGS / BV / Lloyd's / IRS / IBR witness on request
- Positive Material Identification (PMI) with portable XRF / OES
- Dye-penetrant (DPT), ultrasonic (UT) and hydro testing on request
- NACE MR0175 / ISO 15156 compliance for sour service
- PED 2014/68/EU compliance for pressure equipment
- Heat-number stencilling and marking for full traceability
Deep ready stock
Ready stock of inconel flanges in 6 grades at our Mumbai warehouse, so standard sizes ship the same week rather than waiting on a mill rolling programme.
Mill-direct sourcing
Approved supply from Jindal, JSL, Outokumpu, Aperam, Acerinox, Sandvik and leading Japanese and Korean mills — every item traceable to a named producer.
Full certification
EN 10204 3.1 mill test certificate as standard, 3.2 with TÜV, SGS, BV, Lloyd's, IRS or IBR witness, plus PMI, DPT and UT reports on request.
On-time worldwide delivery
Regular export shipments to the GCC, Africa, Southeast Asia, Europe, Latin America and the USA via Nhava Sheva (JNPT), Mundra and Mumbai ports.
How your material is packed and shipped.
Every consignment leaves our Mumbai facility protected for transit and documented for customs, whether it moves by road within India or by sea to an overseas port.
Domestic & export packing
- Wooden crates, pallets or steel bundles depending on section and weight
- Plastic caps, PVC film and VCI paper to protect surfaces and ends in transit
- Heat number and grade stencilled on every piece or bundle tag
- Seaworthy ISPM-15 treated packing for export consignments
Global shipments
- HS Code: 7307
- FOB / CFR / CIF terms via Nhava Sheva (JNPT), Mundra and Mumbai ports
- Documentation: commercial invoice, packing list, MTC, bill of lading, COO, insurance
- Regular exports to the GCC, Africa, Southeast Asia, Europe, Latin America and the USA
Ready to price your requirement?
Share grade, size and quantity — our Mumbai desk responds with pricing, stock position and lead time, usually the same working day.
Frequently asked questions.
Answers to the questions our Mumbai desk is asked most often.
What is inconel flanges?
+
Inconel Flanges is flanges are forged connectors that bolt piping, valves and equipment together — weld neck, slip-on, blind, socket weld, lap joint, threaded and orifice types in raised-face or ring-joint form, produced in inconel to ASTM B564 / ASME B16.5. Steelco stocks it in Mumbai in Flanges: 1/2" – 36" across grades such as Inconel 600, Inconel 601, Inconel 625, Inconel 718.
Which grades of flanges do you stock?
+
We hold 6 grades in ready stock: Inconel 600 (N06600), Inconel 601 (N06601), Inconel 625 (N06625), Inconel 718 (N07718), Inconel X-750 (N07750), Incoloy 800 / 800H / 800HT (N08800 / N08810 / N08811). Other grades are rolled or forged to order against a mill programme.
What sizes of inconel flanges are available?
+
Stock covers Flanges: 1/2" – 36", with thickness or wall from Class 150 – 2500 in rf / rtj / ff machined condition. Non-standard sizes are cut, machined or mill-rolled to your requirement.
What is the price of inconel flanges in India?
+
Price is quoted per kilogram and moves with the alloy surcharge, the grade and the size. Send the grade, size, quantity and certification you need and our Mumbai desk replies the same working day with price, stock position and lead time.
Do you supply flanges with test certificates?
+
Yes. Every consignment ships with an EN 10204 3.1 mill test certificate showing chemistry and mechanical results against ASTM B564 / ASME B16.5. EN 10204 3.2 certification witnessed by TÜV, SGS, BV, Lloyd's, IRS or IBR is arranged on request, along with PMI, dye-penetrant and ultrasonic reports.