Special Alloys Sheet & Plate
Stockist, importer and exporter of special alloys sheet & plate in Mumbai, India — Titanium Sheet & Plate: 1000 – 2000 mm wide · Zirconium Plate & Bar: Ø 10 – 200 mm / 1000 mm wide · Tantalum Sheet & Foil: Up to 1000 mm wide · NAB Bar & Plate: Ø 10 – 300 mm, produced to ASTM B265; ASTM B551 / B550; ASTM B708; ASTM B150 / B171 / B148, with EN 10204 3.1 / 3.2 certification and export to 40+ countries.
What is Special Alloys Sheet & Plate?
Special Alloys Sheet & Plate is special alloys supplied in sheet & plate form — sheet and plate are flat-rolled products — sheet cold-rolled up to 6 mm and plate hot-rolled above 6 mm — used for tanks, vessels, liners, structures and fabricated equipment. Steelco Metal & Alloys stocks special alloys sheet & plate in Mumbai, India in Titanium Sheet & Plate: 1000 – 2000 mm wide · Zirconium Plate & Bar: Ø 10 – 200 mm / 1000 mm wide · Tantalum Sheet & Foil: Up to 1000 mm wide · NAB Bar & Plate: Ø 10 – 300 mm, produced to ASTM B265; ASTM B551 / B550; ASTM B708; ASTM B150 / B171 / B148, in grades including Titanium Grade 2, Titanium Grade 5, Zeron 100, Cupro Nickel 90/10. Every dispatch carries an EN 10204 3.1 mill test certificate (3.2 with third-party witness on request), PMI verification and heat-number traceability, and we export to more than 40 countries.
All grades we stock in special alloys sheet & plate.
Click any grade for its full chemical composition, mechanical properties, equivalents and typical applications. Every grade ships with EN 10204 3.1 / 3.2 certification from our Mumbai stockyard.
Why Choose Special Alloys Sheet & Plate
Flatness and edge condition
Sheet and plate is levelled after rolling and supplied with mill or trimmed edges, so laser and waterjet cutting runs without shimming.
Cut to plan
Plasma, laser and waterjet profiling to your DXF, with bevelling and rolling handled in-house before dispatch.
Surface protection
PVC film, paper interleaving and edge protection as standard so the surface arrives free of handling marks.
Technical Specifications
| Attribute | Details |
|---|---|
| Product | Special Alloys Sheet & Plate |
| Size range | Titanium Sheet & Plate: 1000 – 2000 mm wide · Zirconium Plate & Bar: Ø 10 – 200 mm / 1000 mm wide · Tantalum Sheet & Foil: Up to 1000 mm wide · NAB Bar & Plate: Ø 10 – 300 mm |
| Thickness / wall | 0.5 – 80 mm |
| Finish / condition | Annealed & pickled, Annealed, bright, Extruded, forged, cast |
| Standards | ASTM B265; ASTM B551 / B550; ASTM B708; ASTM B150 / B171 / B148 |
| Grades stocked | Titanium Grade 2, Titanium Grade 5, Zeron 100, Cupro Nickel 90/10, Cupro Nickel 70/30, Nickel Aluminium Bronze, Copper Beryllium, Zirconium 702, Tantalum, Magnesium AZ31B |
| Certification | EN 10204 3.1 as standard, 3.2 with TÜV / SGS / BV / Lloyd's / IRS witness on request |
| Origin | Mill-direct from approved Indian, European, Japanese and Korean producers |
| Dispatch | Ex-stock Mumbai, India; export via Nhava Sheva (JNPT), Mundra and Mumbai ports |
Use our free metal weight calculator — bars, sheets, plates, pipes and sections.
Grade chemistry and mechanical properties supplied in special alloys sheet & plate.
Chemical composition and mechanical properties are grade properties, not form properties — the same grade keeps the same chemistry whether it is supplied as sheet, plate or coil. The tables below list the specified limits for each grade we stock in special alloys sheet & plate, tested and certified to ASTM B265; ASTM B551 / B550; ASTM B708; ASTM B150 / B171 / B148. Values are weight percent (maximum unless a range is shown); mechanical values are minima in the annealed condition.
Chemical composition (weight %)
| Grade | Ti | N | C | H | Fe | O | Al | V | Cr | Ni | Mo | W | Cu | Mn |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Titanium Grade 2UNS R50400 | Balance | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | — | — | — | — | — | — | — | — |
| Titanium Grade 5 (Ti-6Al-4V)UNS R56400 | Balance | 0.05 | 0.08 | 0.015 | 0.40 | 0.20 | 5.50–6.75 | 3.50–4.50 | — | — | — | — | — | — |
| Zeron 100UNS S32760 | — | 0.20–0.30 | 0.030 | — | — | — | — | — | 24.0–26.0 | 6.00–8.00 | 3.00–4.00 | 0.50–1.00 | 0.50–1.00 | 1.00 |
Balance iron. Single figures are maximum limits. Mill test certificates to EN 10204 3.1 are issued with every dispatch.
Mechanical properties (annealed, minimum)
| Grade | Tensile Strength (min) | Yield Strength (0.2%) | Elongation in 50 mm | Hardness (Brinell) | Hardness (Rockwell C) | PREN |
|---|---|---|---|---|---|---|
| Titanium Grade 2 | 345 MPa (50 ksi) | 275–450 MPa | 20% min | 160 HB approx | — | — |
| Titanium Grade 5 (Ti-6Al-4V) | 895 MPa (130 ksi) | 828 MPa (120 ksi) | 10% min | — | 36 max | — |
| Zeron 100 | 750 MPa (109 ksi) | 550 MPa (80 ksi) | 25% min | — | — | 40 minimum |
Typical annealed values; actual results are stated on the heat-specific mill test certificate.
Application Sectors
Desalination & Marine
Titanium and cupro nickel condenser tubing, NAB pumps and valve bodies.
Chemical & Acid Plants
Zirconium and tantalum heat exchangers, columns and bayonet heaters.
Oil & Gas
Zeron 100 manifolds, titanium risers and non-sparking beryllium copper tooling.
Aerospace & Defence
Titanium Grade 5 structures, magnesium housings and non-magnetic hardware.
Pharma & Bio-tech
Titanium reactors, agitators and sterile process piping.
Electronics & Energy
Tantalum capacitors, sputtering targets and high-conductivity beryllium copper.
Cut, finished and certified to your drawing.
Material leaves our Mumbai facility finished to your specification — not as raw stock.
Why buy from Steelco.
Steelco Metal & Alloys is a Mumbai-based stockist, importer and exporter of stainless steel and nickel alloys, shipping certified material worldwide.
Quality & testing on every dispatch
- EN 10204 3.1 mill test certificate on every dispatch
- 3.2 certification with TÜV / SGS / BV / Lloyd's / IRS / IBR witness on request
- Positive Material Identification (PMI) with portable XRF / OES
- Dye-penetrant (DPT), ultrasonic (UT) and hydro testing on request
- NACE MR0175 / ISO 15156 compliance for sour service
- PED 2014/68/EU compliance for pressure equipment
- Heat-number stencilling and marking for full traceability
Deep ready stock
Ready stock of special alloys sheet & plate in 10 grades at our Mumbai warehouse, so standard sizes ship the same week rather than waiting on a mill rolling programme.
Mill-direct sourcing
Approved supply from Jindal, JSL, Outokumpu, Aperam, Acerinox, Sandvik and leading Japanese and Korean mills — every item traceable to a named producer.
Full certification
EN 10204 3.1 mill test certificate as standard, 3.2 with TÜV, SGS, BV, Lloyd's, IRS or IBR witness, plus PMI, DPT and UT reports on request.
On-time worldwide delivery
Regular export shipments to the GCC, Africa, Southeast Asia, Europe, Latin America and the USA via Nhava Sheva (JNPT), Mundra and Mumbai ports.
How your material is packed and shipped.
Every consignment leaves our Mumbai facility protected for transit and documented for customs, whether it moves by road within India or by sea to an overseas port.
Domestic & export packing
- Wooden crates, pallets or steel bundles depending on section and weight
- Plastic caps, PVC film and VCI paper to protect surfaces and ends in transit
- Heat number and grade stencilled on every piece or bundle tag
- Seaworthy ISPM-15 treated packing for export consignments
Global shipments
- HS Code: 7219 / 7506
- FOB / CFR / CIF terms via Nhava Sheva (JNPT), Mundra and Mumbai ports
- Documentation: commercial invoice, packing list, MTC, bill of lading, COO, insurance
- Regular exports to the GCC, Africa, Southeast Asia, Europe, Latin America and the USA
Ready to price your requirement?
Share grade, size and quantity — our Mumbai desk responds with pricing, stock position and lead time, usually the same working day.
Frequently asked questions.
Answers to the questions our Mumbai desk is asked most often.
What is special alloys sheet & plate?
+
Special Alloys Sheet & Plate is sheet and plate are flat-rolled products — sheet cold-rolled up to 6 mm and plate hot-rolled above 6 mm — used for tanks, vessels, liners, structures and fabricated equipment, produced in special alloys to ASTM B265; ASTM B551 / B550; ASTM B708; ASTM B150 / B171 / B148. Steelco stocks it in Mumbai in Titanium Sheet & Plate: 1000 – 2000 mm wide · Zirconium Plate & Bar: Ø 10 – 200 mm / 1000 mm wide · Tantalum Sheet & Foil: Up to 1000 mm wide · NAB Bar & Plate: Ø 10 – 300 mm across grades such as Titanium Grade 2, Titanium Grade 5, Zeron 100, Cupro Nickel 90/10.
Which grades of sheet & plate do you stock?
+
We hold 10 grades in ready stock: Titanium Grade 2 (R50400), Titanium Grade 5 (R56400), Zeron 100 (S32760), Cupro Nickel 90/10 (C70600), Cupro Nickel 70/30 (C71500), Nickel Aluminium Bronze (C63000 / C95800), Copper Beryllium (C17200), Zirconium 702 (R60702), Tantalum (R05200), Magnesium AZ31B (M11311). Other grades are rolled or forged to order against a mill programme.
What sizes of special alloys sheet & plate are available?
+
Stock covers Titanium Sheet & Plate: 1000 – 2000 mm wide · Zirconium Plate & Bar: Ø 10 – 200 mm / 1000 mm wide · Tantalum Sheet & Foil: Up to 1000 mm wide · NAB Bar & Plate: Ø 10 – 300 mm, with thickness or wall from 0.5 – 80 mm in annealed & pickled, annealed, bright, extruded, forged, cast condition. Non-standard sizes are cut, machined or mill-rolled to your requirement.
What is the price of special alloys sheet & plate in India?
+
Price is quoted per kilogram and moves with the alloy surcharge, the grade and the size. Send the grade, size, quantity and certification you need and our Mumbai desk replies the same working day with price, stock position and lead time.
Do you supply sheet & plate with test certificates?
+
Yes. Every consignment ships with an EN 10204 3.1 mill test certificate showing chemistry and mechanical results against ASTM B265; ASTM B551 / B550; ASTM B708; ASTM B150 / B171 / B148. EN 10204 3.2 certification witnessed by TÜV, SGS, BV, Lloyd's, IRS or IBR is arranged on request, along with PMI, dye-penetrant and ultrasonic reports.