SS 202
SS 202 (UNS S20200) stockist, importer and exporter in Mumbai. Manganese-substituted 200 series austenitic sheet, coil, pipe and bar for railings, furniture and architectural use.
About SS 202
SS 202 (UNS S20200) stockist, importer and exporter in Mumbai. Manganese-substituted 200 series austenitic sheet, coil, pipe and bar for railings, furniture and architectural use.
SS 202 is a 200-series austenitic stainless steel where manganese and nitrogen partially replace nickel, giving a lower-cost alternative to 304 for indoor, low-corrosion applications such as railings, furniture and kitchen equipment.
Steelco Metal & Alloys stocks SS 202 (UNS S20200) in Mumbai, India as a stockist, importer and exporter, and ships to 40+ countries. Every dispatch carries EN 10204 3.1 (3.2 on request) mill test certificates, PMI verification and is open to third-party inspection.
Available forms and size range for SS 202
Available Forms
- Sheet
- Plate
- Coil
- Round Bar
- Pipe
- Tube
- Flat Bar
- Angle
Size Range
- Sheets 0.3–100 mm
- Coils 0.3–12 mm
- Bars 0.5–300 mm
- Pipes 1/2"–32" NB
Chemical composition of SS 202 (% by weight)
Values are per the governing ASTM / ASME product specification. A single value means a maximum; a range shows the specified minimum and maximum. Balance is iron.
| C | Mn | Si | P | S | Cr | Ni | N |
|---|---|---|---|---|---|---|---|
| ≤ 0.15 | 7.50–10.00 | ≤ 1.00 | ≤ 0.060 | ≤ 0.030 | 17.0–19.0 | 4.0–6.0 | ≤ 0.25 |
| max | range | max | max | max | range | range | max |
Mechanical properties of SS 202 (annealed, room temperature)
| Property | Typical Value |
|---|---|
| Tensile Strength (min) | 515 MPa (75 ksi) |
| Yield Strength (0.2%) | 275 MPa (40 ksi) |
| Elongation in 50 mm | 40% min |
| Hardness (Rockwell B) | 95 max |
SS 202 specifications and international equivalents
| Attribute | Details |
|---|---|
| ASTM / ASME | ASTM A240 · UNS S20200 |
| EN / DIN | 1.4372 approx (X12CrMnNiN17-7-5) |
| JIS | SUS202 |
| UNS | UNS S20200 |
| Density | 7.80 g/cm³ |
| Size Range | Sheets 0.3–100 mm · Coils 0.3–12 mm · Bars 0.5–300 mm · Pipes 1/2"–32" NB |
| Certifications | EN 10204 3.1 / 3.2 MTC · PMI · Third-party inspection |
Use our free metal weight calculator — bars, sheets, plates, pipes and sections.
Typical applications for SS 202
Every dispatch is traceable, tested and certified.
Material is supplied with EN 10204 3.1 (3.2 on request) mill test certificates, PMI and spectro verification, and is open to third-party inspection by TUV, SGS, BV, Lloyd’s and IRS from our Mumbai warehouse.
EN 10204 3.1 / 3.2
Mill test certificate with every consignment.
PMI & Spectro
Positive material identification before dispatch.
Third-party Inspection
TUV · SGS · BV · Lloyd's · IRS welcome.
Export Documentation
Full set prepared for 40+ countries.
Other grades you may also need
Ready to price your requirement?
Share your grade, form, size and quantity — our Mumbai desk responds with pricing, stock position and lead time, usually the same working day.

