Serrated Anti-Slip Grating
Serrated anti-slip MS grating in IS 2062 E250, galvanised to IS 4759 for oily and wet decks. Mumbai manufacturer, stockist and exporter to 40+ countries.
About Serrated Anti-Slip Grating
Serrated anti-slip MS grating in IS 2062 E250, galvanised to IS 4759 for oily and wet decks. Mumbai manufacturer, stockist and exporter to 40+ countries.
Serrated grating has notches cut into the top edge of each bearing bar, which gives grip under oil, water or ice where plain grating would be slippery. It uses the same IS 2062 E250 steel and forge-welded construction as plain grating, and is specified for offshore decks, refinery platforms and loading bays.
Steelco Metal & Alloys stocks Serrated Anti-Slip Grating (IS 2062 E250) in Mumbai, India as a stockist, importer and exporter, and ships to 40+ countries. Every dispatch carries EN 10204 3.1 (3.2 on request) mill test certificates, PMI verification and is open to third-party inspection.
Available forms and size range for Serrated Anti-Slip Grating
Available Forms
- Walkway Panels
- Platform Grating
- Stair Treads
- Trench Covers
- Cut-to-Plan Panels
Size Range
- Bearing bar 20×3 to 50×5 mm
- pitch 30 / 40 mm
- cross bar 50 / 100 mm
- panels up to 1000 × 6000 mm
Chemical composition of Serrated Anti-Slip Grating (% by weight)
Values are per the governing ASTM / ASME product specification. A single value means a maximum; a range shows the specified minimum and maximum. Balance is iron.
| C | Mn | Si | P | S | CE |
|---|---|---|---|---|---|
| ≤ 0.23 | ≤ 1.50 | ≤ 0.40 | ≤ 0.045 | ≤ 0.045 | ≤ 0.42 |
| max | max | max | max | max | max |
Mechanical properties of Serrated Anti-Slip Grating (annealed, room temperature)
| Property | Typical Value |
|---|---|
| Tensile Strength (min) | 410 MPa |
| Yield Strength (min) | 250 MPa |
| Elongation (min) | 23% |
| Galvanising | IS 4759 hot-dip, 610 g/m² typical |
Serrated Anti-Slip Grating specifications and international equivalents
| Attribute | Details |
|---|---|
| ASTM / ASME | ASTM A36 equivalent · IS 2062 E250 |
| EN / DIN | EN 10025 S235JR / S275JR |
| JIS | JIS G3101 SS400 |
| UNS | IS 2062 E250 |
| Density | 7.85 g/cm³ |
| Size Range | Bearing bar 20×3 to 50×5 mm · pitch 30 / 40 mm · cross bar 50 / 100 mm · panels up to 1000 × 6000 mm |
| Certifications | EN 10204 3.1 / 3.2 MTC · PMI · Third-party inspection |
Use our free metal weight calculator — bars, sheets, plates, pipes and sections.
Typical applications for Serrated Anti-Slip Grating
Every dispatch is traceable, tested and certified.
Material is supplied with EN 10204 3.1 (3.2 on request) mill test certificates, PMI and spectro verification, and is open to third-party inspection by TUV, SGS, BV, Lloyd’s and IRS from our Mumbai warehouse.
EN 10204 3.1 / 3.2
Mill test certificate with every consignment.
PMI & Spectro
Positive material identification before dispatch.
Third-party Inspection
TUV · SGS · BV · Lloyd's · IRS welcome.
Export Documentation
Full set prepared for 40+ countries.
Other grades you may also need
Ready to price your requirement?
Share your grade, form, size and quantity — our Mumbai desk responds with pricing, stock position and lead time, usually the same working day.

