Zircaloy-2 / Zircaloy-4
Zircaloy-2 and Zircaloy-4 nuclear grade cladding tube, sheet, strip and bar with full documentation. Mumbai stockist and exporter, 3.1 MTC, 40+ countries.
About Zircaloy-2 / Zircaloy-4
Zircaloy-2 and Zircaloy-4 nuclear grade cladding tube, sheet, strip and bar with full documentation. Mumbai stockist and exporter, 3.1 MTC, 40+ countries.
Zircaloy-2 (UNS R60802) and Zircaloy-4 (UNS R60804) are tin-alloyed, hafnium-lean zirconium alloys developed for nuclear service, where their very low thermal-neutron absorption cross-section and resistance to high-temperature water corrosion are essential. Zircaloy-4 omits nickel to reduce hydrogen pick-up, and both are used for fuel cladding, channel boxes and reactor internals.
Steelco Metal & Alloys stocks Zircaloy-2 / Zircaloy-4 (UNS R60802 / R60804) in Mumbai, India as a stockist, importer and exporter, and ships to 40+ countries. Every dispatch carries EN 10204 3.1 (3.2 on request) mill test certificates, PMI verification and is open to third-party inspection.
Available forms and size range for Zircaloy-2 / Zircaloy-4
Available Forms
- Tube
- Cladding Tube
- Sheet
- Strip
- Plate
- Round Bar
- Wire
Size Range
- Cladding tube Ø 9 – 15 mm
- sheet 0.5 – 5 mm
- bar Ø 6 – 100 mm
- nuclear-grade documentation
Chemical composition of Zircaloy-2 / Zircaloy-4 (% by weight)
Values are per the governing ASTM / ASME product specification. A single value means a maximum; a range shows the specified minimum and maximum. Balance is iron.
| Zr | Sn | Fe | Cr | Ni (Zircaloy-2 only) | Hf |
|---|---|---|---|---|---|
| ≤ Balance | 1.20–1.70 | 0.07–0.24 | 0.05–0.15 | 0.03–0.08 | ≤ 0.010 |
| max | range | range | range | range | max |
Mechanical properties of Zircaloy-2 / Zircaloy-4 (annealed, room temperature)
| Property | Typical Value |
|---|---|
| Tensile Strength (annealed) | 413 MPa min |
| Yield Strength (0.2%) | 241 MPa min |
| Elongation | 20% min |
| Density | 6.56 g/cm³ |
Zircaloy-2 / Zircaloy-4 specifications and international equivalents
| Attribute | Details |
|---|---|
| ASTM / ASME | ASTM B350 / B351 / B352 / B353 · UNS R60802 / R60804 |
| EN / DIN | Zircaloy-2 / -4 (nearest) |
| JIS | — |
| UNS | UNS R60802 / R60804 |
| Density | 6.56 g/cm³ |
| Size Range | Cladding tube Ø 9 – 15 mm · sheet 0.5 – 5 mm · bar Ø 6 – 100 mm · nuclear-grade documentation |
| Certifications | EN 10204 3.1 / 3.2 MTC · PMI · Third-party inspection |
Use our free metal weight calculator — bars, sheets, plates, pipes and sections.
Typical applications for Zircaloy-2 / Zircaloy-4
Every dispatch is traceable, tested and certified.
Material is supplied with EN 10204 3.1 (3.2 on request) mill test certificates, PMI and spectro verification, and is open to third-party inspection by TUV, SGS, BV, Lloyd’s and IRS from our Mumbai warehouse.
EN 10204 3.1 / 3.2
Mill test certificate with every consignment.
PMI & Spectro
Positive material identification before dispatch.
Third-party Inspection
TUV · SGS · BV · Lloyd's · IRS welcome.
Export Documentation
Full set prepared for 40+ countries.
Other grades you may also need
Ready to price your requirement?
Share your grade, form, size and quantity — our Mumbai desk responds with pricing, stock position and lead time, usually the same working day.

