Welding Consumables Strip & Overlay
Stockist, importer and exporter of welding consumables strip & overlay in Mumbai, India — Strip 30 × 0.5 mm and 60 × 0.5 mm, coil packed, produced to AWS A5.9 / A5.14 strip, EN ISO 14343, with EN 10204 3.1 / 3.2 certification and export to 40+ countries.
What is Welding Consumables Strip & Overlay?
Welding Consumables Strip & Overlay is welding consumables supplied in strip & overlay form — strip cladding consumables are wide flat electrodes with matching bonded flux, used for electroslag and submerged-arc overlay of vessel internals with a corrosion-resistant layer. Steelco Metal & Alloys stocks welding consumables strip & overlay in Mumbai, India in Strip 30 × 0.5 mm and 60 × 0.5 mm, coil packed, produced to AWS A5.9 / A5.14 strip, EN ISO 14343, in grades including ER308L / E308L-16, ER316L / E316L-16, ER309L / E309L-16, ER347 / E347-16. Every dispatch carries an EN 10204 3.1 mill test certificate (3.2 with third-party witness on request), PMI verification and heat-number traceability, and we export to more than 40 countries.
All grades we stock in welding consumables strip & overlay.
Click any grade for its full chemical composition, mechanical properties, equivalents and typical applications. Every grade ships with EN 10204 3.1 / 3.2 certification from our Mumbai stockyard.
Why Choose Welding Consumables Strip & Overlay
Flatness and edge condition
Cladding strip is levelled after rolling and supplied with mill or trimmed edges, so laser and waterjet cutting runs without shimming.
Cut to plan
Plasma, laser and waterjet profiling to your DXF, with bevelling and rolling handled in-house before dispatch.
Surface protection
PVC film, paper interleaving and edge protection as standard so the surface arrives free of handling marks.
Technical Specifications
| Attribute | Details |
|---|---|
| Product | Welding Consumables Strip & Overlay |
| Size range | Strip 30 × 0.5 mm and 60 × 0.5 mm, coil packed |
| Thickness / wall | Strip 30 × 0.5 mm and 60 × 0.5 mm, coil packed |
| Finish / condition | As per specification |
| Standards | AWS A5.9 / A5.14 strip, EN ISO 14343 |
| Grades stocked | ER308L / E308L-16, ER316L / E316L-16, ER309L / E309L-16, ER347 / E347-16, ER2209 / E2209, ER2594 / E2594, ERNiCrMo-3, ERNiCrMo-4, ERNiCu-7, E7018 / ER70S-6 |
| Certification | EN 10204 3.1 as standard, 3.2 with TÜV / SGS / BV / Lloyd's / IRS witness on request |
| Origin | Mill-direct from approved Indian, European, Japanese and Korean producers |
| Dispatch | Ex-stock Mumbai, India; export via Nhava Sheva (JNPT), Mundra and Mumbai ports |
Use our free metal weight calculator — bars, sheets, plates, pipes and sections.
Grade chemistry and mechanical properties supplied in welding consumables strip & overlay.
Chemical composition and mechanical properties are grade properties, not form properties — the same grade keeps the same chemistry whether it is supplied as sheet, plate or coil. The tables below list the specified limits for each grade we stock in welding consumables strip & overlay, tested and certified to AWS A5.9 / A5.14 strip, EN ISO 14343. Values are weight percent (maximum unless a range is shown); mechanical values are minima in the annealed condition.
Chemical composition (weight %)
| Grade | C | Cr | Ni | Mo | Mn | Si | Nb |
|---|---|---|---|---|---|---|---|
| ER308L / E308L-16AWS A5.9 / A5.4 | 0.03 | 19.5–22.0 | 9.0–11.0 | 0.75 | 1.0–2.5 | 0.30–0.65 | — |
| ER316L / E316L-16AWS A5.9 / A5.4 | 0.03 | 18.0–20.0 | 11.0–14.0 | 2.0–3.0 | 1.0–2.5 | 0.30–0.65 | — |
| ER309L / E309L-16AWS A5.9 / A5.4 | 0.03 | 23.0–25.0 | 12.0–14.0 | 0.75 | 1.0–2.5 | 0.30–0.65 | — |
| ER347 / E347-16AWS A5.9 / A5.4 | 0.08 | 19.0–21.5 | 9.0–11.0 | — | 1.0–2.5 | 0.30–0.65 | 10×C–1.0 |
Balance iron. Single figures are maximum limits. Mill test certificates to EN 10204 3.1 are issued with every dispatch.
Mechanical properties (annealed, minimum)
| Grade | Tensile Strength (min, weld metal) | Elongation (min) | Ferrite | Service temperature |
|---|---|---|---|---|
| ER308L / E308L-16 | 520 MPa | 35% | FN 3–12 typical | — |
| ER316L / E316L-16 | 490 MPa | 30% | FN 3–10 typical | — |
| ER309L / E309L-16 | 520 MPa | 30% | FN 8–20 typical | — |
| ER347 / E347-16 | 520 MPa | 30% | — | Up to 815 °C |
Typical annealed values; actual results are stated on the heat-specific mill test certificate.
Application Sectors
Fabrication Shops
General stainless and carbon steel fabrication, tanks and structures.
Oil & Gas
Sour-service welds, CRA overlays and NACE-qualified procedures.
Power & Boilers
P22 and P91 welds with matched B3 and B9 electrodes.
Pharma & Food
Hygienic orbital welds in 316L with purge control.
Shipbuilding & Marine
Duplex, cupro nickel and Monel welds in seawater systems.
Maintenance
Dissimilar-metal repairs with ER309L and nickel-base fillers.
Cut, finished and certified to your drawing.
Material leaves our Mumbai facility finished to your specification — not as raw stock.
Why buy from Steelco.
Steelco Metal & Alloys is a Mumbai-based stockist, importer and exporter of stainless steel and nickel alloys, shipping certified material worldwide.
Quality & testing on every dispatch
- EN 10204 3.1 mill test certificate on every dispatch
- 3.2 certification with TÜV / SGS / BV / Lloyd's / IRS / IBR witness on request
- Positive Material Identification (PMI) with portable XRF / OES
- Dye-penetrant (DPT), ultrasonic (UT) and hydro testing on request
- NACE MR0175 / ISO 15156 compliance for sour service
- PED 2014/68/EU compliance for pressure equipment
- Heat-number stencilling and marking for full traceability
Deep ready stock
Ready stock of welding consumables strip & overlay in 10 grades at our Mumbai warehouse, so standard sizes ship the same week rather than waiting on a mill rolling programme.
Mill-direct sourcing
Approved supply from Jindal, JSL, Outokumpu, Aperam, Acerinox, Sandvik and leading Japanese and Korean mills — every item traceable to a named producer.
Full certification
EN 10204 3.1 mill test certificate as standard, 3.2 with TÜV, SGS, BV, Lloyd's, IRS or IBR witness, plus PMI, DPT and UT reports on request.
On-time worldwide delivery
Regular export shipments to the GCC, Africa, Southeast Asia, Europe, Latin America and the USA via Nhava Sheva (JNPT), Mundra and Mumbai ports.
How your material is packed and shipped.
Every consignment leaves our Mumbai facility protected for transit and documented for customs, whether it moves by road within India or by sea to an overseas port.
Domestic & export packing
- Wooden crates, pallets or steel bundles depending on section and weight
- Plastic caps, PVC film and VCI paper to protect surfaces and ends in transit
- Heat number and grade stencilled on every piece or bundle tag
- Seaworthy ISPM-15 treated packing for export consignments
Global shipments
- HS Code: 8311
- FOB / CFR / CIF terms via Nhava Sheva (JNPT), Mundra and Mumbai ports
- Documentation: commercial invoice, packing list, MTC, bill of lading, COO, insurance
- Regular exports to the GCC, Africa, Southeast Asia, Europe, Latin America and the USA
Ready to price your requirement?
Share grade, size and quantity — our Mumbai desk responds with pricing, stock position and lead time, usually the same working day.
Frequently asked questions.
Answers to the questions our Mumbai desk is asked most often.
What is welding consumables strip & overlay?
+
Welding Consumables Strip & Overlay is strip cladding consumables are wide flat electrodes with matching bonded flux, used for electroslag and submerged-arc overlay of vessel internals with a corrosion-resistant layer, produced in welding consumables to AWS A5.9 / A5.14 strip, EN ISO 14343. Steelco stocks it in Mumbai in Strip 30 × 0.5 mm and 60 × 0.5 mm, coil packed across grades such as ER308L / E308L-16, ER316L / E316L-16, ER309L / E309L-16, ER347 / E347-16.
Which grades of strip & overlay do you stock?
+
We hold 10 grades in ready stock: ER308L / E308L-16 (SS 304 / 304L), ER316L / E316L-16 (SS 316 / 316L), ER309L / E309L-16 (Dissimilar joints), ER347 / E347-16 (SS 321 / 347), ER2209 / E2209 (Duplex 2205), ER2594 / E2594 (Super duplex 2507), ERNiCrMo-3 (Inconel 625 / 904L), ERNiCrMo-4 (Hastelloy C276), ERNiCu-7 (Monel 400), E7018 / ER70S-6 (Carbon steel). Other grades are rolled or forged to order against a mill programme.
What sizes of welding consumables strip & overlay are available?
+
Stock covers Strip 30 × 0.5 mm and 60 × 0.5 mm, coil packed, with thickness or wall from Strip 30 × 0.5 mm and 60 × 0.5 mm, coil packed in as per specification condition. Non-standard sizes are cut, machined or mill-rolled to your requirement.
What is the price of welding consumables strip & overlay in India?
+
Price is quoted per kilogram and moves with the alloy surcharge, the grade and the size. Send the grade, size, quantity and certification you need and our Mumbai desk replies the same working day with price, stock position and lead time.
Do you supply strip & overlay with test certificates?
+
Yes. Every consignment ships with an EN 10204 3.1 mill test certificate showing chemistry and mechanical results against AWS A5.9 / A5.14 strip, EN ISO 14343. EN 10204 3.2 certification witnessed by TÜV, SGS, BV, Lloyd's, IRS or IBR is arranged on request, along with PMI, dye-penetrant and ultrasonic reports.